TROUBLESHOOTING
Start with safe, model-aware checks.
Use the categories below for common hardware checks. Avoid resets, firmware flashing or recovery procedures unless the exact approved instructions for your model are available.
01
Power & startup
Start with the physical power path before changing system settings.
Device does not power on
Confirm the supplied power adapter is connected securely at both ends and test the wall outlet with another device. Avoid substituting an unverified adapter or opening the TV box.
Power light is on but nothing happens
Confirm the TV is on the correct HDMI input and reconnect the HDMI cable once. If possible, test another HDMI port on the display before changing any device settings.
Device powers on but does not complete startup
Disconnect power, reconnect it once, then allow the normal startup process to complete without repeatedly unplugging the device. If the same screen remains, contact support with the exact model and a photo of the display.
Device restarts unexpectedly
Check that the original power adapter is firmly connected and that the device has normal airflow. Repeated restarts should be escalated to support rather than followed by an unverified reset procedure.
02
Picture & sound
Check the connection path before changing advanced display settings.
No picture on the TV/display
Confirm the HDMI cable is connected securely and the TV/display is set to the matching input source. Reconnect the cable and try another HDMI input before changing advanced settings.
Picture appears but sound does not
Confirm the TV/display is not muted and its active audio output is correct. Reconnect HDMI once and test another known working source on the same display to rule out a TV-side issue.
Picture flickers or drops out
Check that the HDMI cable is seated firmly and try another HDMI port or a known working cable. Keep the device and cable away from obvious physical strain before changing display settings.
Image does not fit the screen correctly
Check the TV/display aspect-ratio or overscan setting first. If model-specific display settings are required, use the verified guide for the exact device before making further changes.
03
Remote control
Remote behavior and pairing methods can vary by exact model.
Remote does not respond
Check the batteries, battery orientation and obvious obstructions. Confirm the TV box itself is powered and responsive before treating the issue as a remote fault.
Only some remote buttons work
Replace the batteries with a fresh pair and test again. If the behavior is unchanged, record which buttons are affected and provide the exact model to support.
Remote may need pairing
Pairing methods differ between models. Do not use a generic button combination; follow only the verified pairing instructions for the exact brand and model.
Voice or Bluetooth remote features do not work
Confirm the exact model supports the feature and that the remote is the correct one for that model. Use the model-specific guide before attempting any re-pairing process.
04
Network
Verify the router/network first, then confirm the model supports the chosen connection.
Wi-Fi does not connect
Confirm the network is available, re-enter the correct credentials and restart both the router and TV box before changing advanced network settings.
Wi-Fi signal is weak or unstable
Temporarily move the device closer to the router and reduce obvious physical obstructions. If other devices are also unstable on the same network, address the router or internet connection first.
Ethernet does not connect
Confirm the exact model supports Ethernet, then check the network cable and router port. Use the product specification or model guide to confirm the supported wired connection.
Connected to Wi-Fi but internet is unavailable
Test the same network with another device, then restart the router if the connection is also unavailable there. If only the TV box is affected, contact support with the model and network details.
MODEL-SPECIFIC DOCUMENTS
Use the exact guide when basic checks are not enough.
Open only the verified manual, video or support resource that matches the exact brand and model.
SeekBoxS3 Pro — User Manual & TroubleshootingUse the supplied S3 Pro material for model-specific reference.
View guide
SuperBoxS6 Series — Setup GuideApplies to S6 Max, Ultra and Pro. Use only for matching S6 models.
View guide
STILL HAVING AN ISSUE?
Escalate with the right information.
Prepare the order number, brand, exact model, issue description and useful photos/screenshots.